BOOST 2h Function

This guide explains how to activate the BOOST 2h function on the Tesi Electric radiator.

 

What it is

La funzione impThis function sets the radiator to heat at maximum temperature for up to 2 hours.

• Early stop: the radiator automatically turns off if the room temperature reaches 30 °C before the 2-hour period ends.

• End of program: after 2 hours, the radiator automatically returns to the last mode that was active before BOOST 2h.

 

When to use it

Ideal when you want to quickly warm up a room and enjoy maximum comfort right away.

---

Remote Icon	Temperature Range
	30°C

---

How to activate BOOST 2h using the Remote Control

Make sure the radiator is in ON mode by pressing the Power button.   Press and hold the P button for at least 3 seconds, or until the radiator emits a confirmation beep.   After the beep, the radiator LED will flash red.

How to activate BOOST 2h directly on the Radiator

Press the button on the Tesi Electric radiator’s control panel until it emits two red flashes and two beeps in sequence.

---

Tips and Troubleshooting

Find answers to the most frequently asked questions here:

• CHRONO Mode

• The Tesi Electric Radiator Is On But Not Heating
• The Button on the Tesi Electric Radiator Does Not Work

---

Check the Operation section to explore all the functions of the Tesi Electric radiator.

---

 

Still need help?

If you’ve followed all the steps and the issue persists, please contact our Customer Service.