Skip to main content

CHRONO Mode

Updated

This guide explains how to set the Tesi Electric radiator to CHRONO mode.

 

What it is

CHRONO mode allows the Tesi Electric radiator to follow the weekly schedule programmed by the user, automatically switching between COMFORT and NIGHT modes according to days and time slots.

 

When to use it

Ideal for those who want heating automatically optimized according to their daily routine, ensuring maximum comfort and energy efficiency.

 

IMPORTANT
The radiator’s scheduling can only be programmed using the remote control.

 

Remote Icon Radiator LED Temperature Range

 

 

 10°C - 30°C

 

How to activate CHRONO mode
   
  1. Make sure the radiator is in ON mode by pressing the Power button.

     
  2. Keep pressing the Mode button to cycle through the available settings until the clock icon appears, corresponding to CHRONO mode.

     

  3. The LED will gradually change from orange to yellow to red, then turn off, confirming the setting.

 

 

How to Create a Weekly Schedule

 

IMPORTANT
For the schedule to work correctly, the remote control must have the correct date and time set.

 

    
  1. Press the CHRONO button to set the correct date and time
    (see section How to Program the Tesi Electric Remote Control).

     
  2. When finished, the CHRONO mode icon will flash.
     

 

    
  1. At the bottom of the display, a numbered bar appears, corresponding to the 24 hourly slots of the day.
    On the left side of the bar, a small square flashes in correspondence with the first box.

     

  2. The schedule starts from:

    • First time slot of the day (00:00 – 01:00)(00:00–01:00).

    • First day of the week (1 = Monday)
      The day of the week is shown by the small number at the bottom left of the time display.

 

    

  1. Use the + and – buttons to set the desired temperature for each time slot:

    • + button → COMFORT temperature (dark square)

    • – button → NIGHT temperature (empty square)


   

IMPORTANT
 

  • After each selection (COMFORT or NIGHT), the schedule automatically advances to the next hourly slot.

  • Once the 24th time slot is completed, the cursor returns to the first slot.
    During this phase, the schedule is not yet saved, allowing you to correct any mistakes.

 

    
  1. Press the Mode button to confirm the schedule for the day.
    The programming will automatically move to the next day.
     
     
  2. Repeat steps 3 and 4 for each remaining day of the week.
    After setting Sunday, press Mode again to confirm the entire weekly schedule.

     
  3. Your schedule is now active:
    The radiator will automatically switch between COMFORT and NIGHT modes according to your programmed times.

 

Note: 
After a prolonged power outage, the radiator may temporarily lose its saved schedules.
When power is restored:

  • The device starts in Standby mode.

  • When switched to ON, the radiator will start in COMFORT mode with the temperature set to 21 °C.

  • To reactivate the schedules, select CHRONO mode using the remote control.

 

 

Tips and Troubleshooting

Find answers to the most frequently asked questions here:

 

Check the Operation section to explore all the functions of the Tesi Electric radiator.

 

Still need help?

If you’ve followed all the steps and the issue persists, please contact our Customer Service.

Related articles