Skip to main content

How to Program the Tesi Electric Remote Control

Updated

This guide explains how to correctly set the date and time on your Tesi Electric remote control.
 

Note:
If you replace the batteries, you will need to re-enter the date and time settings.

 

Procedure         

    

  1. Insert the Batteries
    Make sure to follow the correct polarity.

     

  2. Set the Year

    1. When first powered on, the display will flash 2020 (default year).

    2. Use the +/- buttons to select the current year.

    3. Press Mode to confirm.

       

  3. Set the Month

    1. The display will show the default month (Jan = January).

    2. Use the +/- buttons to select the correct month.

    3. Press Mode to confirm.

 

    

  1. Set the Day

    1. The display will show 01 (the first day of the month). A smaller number next to it indicates the day of the week (1 = Monday, 2 = Tuesday, etc.).

    2. Use the +/- buttons to select the correct day of the month. The day of the week will update automatically.

    3. Press Mode to confirm.

       

  2. Set the Time

    1. The display will show 00:00.

    2. Use the +/- buttons to set the correct time.

    3. Press Mode to confirm.

    

WARNING
If the remote control is not programmed correctly, the radiator may not follow the scheduled settings.

 

 

Tips and Troubleshooting

Find answers to the most frequently asked questions here:

 

Check the Installation section for all the preliminary information on using the Tesi Electric radiator.

 

Still need help?

If you’ve followed all the steps and the issue persists, please contact our Customer Service.

Related articles