Yes! With the Tesi Electric remote controller, you can control all IRSAP radiators equipped with an infrared receiver.
What you need to know:
Maximum Distance: 5–10 meters. Make sure you are close to the radiator you want to control.
Orientation: The remote must always be pointed directly at the radiator’s infrared receiver.
Interference: There should be no obstacles between the remote and the radiator.
WARNING:
Communication between the remote and the radiator is one-way: commands travel from the remote to the radiator only, not the other way around.
This creates some limitations when using the same remote with multiple radiators:
Changes made directly on a radiator are not registered by the remote.
The remote display always shows only the last setting sent to the last radiator controlled.
You cannot see the active mode on a radiator (comfort, night, etc.) just by pointing the remote at it.
Tips and Troubleshooting
Find answers to the most frequently asked questions here:
- How to Program the Tesi Electric Remote Control
- Tesi Electric Remote Control: Quick Overview
- The Tesi Electric Radiator Does Not Respond to Remote Control Commands
Check the Installation section for all the preliminary information on using the Tesi Electric radiator.
Still need help?
If you’ve followed all the steps and the issue persists, please contact our Customer Service.