Skip to main content

Additional menu functions

Updated

This section lists the accessory functions available in the blower menu and how to access them.

 

 

Available accessory functions

   NUMBER    TYPE      OPTIONS
 
         
   00   rF INI : Pairing between remote control and Blower
Click on the blue text to access the procedure.		   Access
 
   01   FP: Fil Pilote activation/deactivation
Set the parameter to Yes if you have connected the radiator to a Fil Pilote control unit.		      Yes/no
 
   02   OPEN: Open Window Detection
Activating this function allows you to set the radiator to switch off in the event of a sudden drop in temperature.		       Yes/no
         
   03  

ITCS: Intelligent Temperature Control System

The radiator switches on in advance (up to 2 hours) to ensure the desired temperature at the programmed time.

On first start-up, the thermostat calculates the time required to reach the set temperature in the room. Each time the programme is changed, the thermostat automatically updates this value, adapting to changes in the outside temperature.

       Yes/no
         
   04   dEGr: Temperature unit of measurement setting      °C/°F
 
 
   05   Time format
Allows you to select the time display format: 24h or 12h (AM/PM).		      24H/12H
         
   06   dst:
Automatically updates the time when switching between standard time and daylight saving time.		      Yes/no
 
   07  

HG: Antifreeze temperature

Allows you to set the default value associated with antifreeze mode.

      0,5-10°C
 
   08   Maximum temperature for timed mode
Allows you to set the default value associated with timed mode.		      20-30°C
 
   10   VErs
Remote control firmware version 		      X
 
   11  

Clr ALL: Factory reset

Press the “OK” button until the countdown has finished. The text “donE” will appear on the display.
 

      X
 
   12   End: Exit Menu      X

 

 

 How to access the Menu Functions

 

    
  1. Press and hold navigation button until the text rF ini appears on the display.
       

 

    
  1. The first menu item “00” will appear at the top right of the screen.
       

 

    
  1. Press the button to select one of the 13 available menu items (00–12)
     
  2. Press OK to confirm the selection
     
  3. Press the + or - buttons to configure the desired value
     
  4. Press “OK” to confirm 
       

 

    
  1. To exit the menu, press the button repeatedly until item 12 appears at the top right of the screen. The text “End” will appear on the display
     
  2.  Click OK to confirm that you want to exit the menu

 

 

 

 

 

Tips or troubleshooting 

Here you can find the answers to the most frequently asked questions.

 

 

See the Operation section to discover all the functions of the radiator with Blower.

 

 

Do you still need help?

If you have followed all the steps but the problem persists, contact our Customer Service.

Related articles