Preset Weekly Programs – IRSAP heat

The guide explains how to activate one of the three preset weekly programs (P1, P2 or P3) so that the radiator with blower operates in automatic mode, automatically alternating Eco and Comfort temperatures during the different time slots throughout the week.

AVAILABLE FOR

Electric Radiator
Blower
Both

What it is

The preset weekly programs (P1, P2 and P3) allow the radiator with blower to operate automatically without manual intervention, following a pre-set weekly schedule.

When to use it

Useful when you want the radiator to manage COMFORT and ECO temperatures automatically according to a ready-made schedule that matches your daily routine.

How to select a preset weekly program

Preset Schedules

Below are the three preset schedules, each designed for a different time of day when the heating switches on.

Tips or Troubleshooting

Here you will find answers to frequently asked questions.

How to program the Tesi Electric remote control
Why doesn’t the Tesi Electric radiator follow the saved schedules?
The Tesi Electric radiator does not respond to remote control commands

See the Operation section to discover all the functions of the Tesi Electric radiator.

Still need help?

If you have followed all the steps but the problem persists, please contact our Customer Service.

			Make sure that the switch located on the back of the Blower is set to position 1 and that the Blower is switched on. Press the button repeatedly until you select the P icon at the top of the display, corresponding to PROGRAMMED mode; then press OK to confirm.

			Use the + and - buttons to select the preset program that best matches your daily routine from: P1 P2 P3 Press OK to confirm your choice.

			NOTE The three preset programs differ in the alternation between COMFORT temperature and REDUCED temperature over the 24 hours of the day and the 7 days of the week. When a program is selected, the schedule for the current day will be displayed at the bottom of the screen, divided into 24 time slots. Legend: dark square: comfort temperature light square: reduced temperature

			WARNING: For electric radiators with Blower only. Use the + and - buttons to select which device you want to activate with the chosen program. Then press OK to confirm. bLo (Blower only) rAd (Radiator only) rAd bLo (Radiatore and Blower) Press OK to confirm.

			The A/M LED will light up to confirm that the setting has been received, together with the LED of the corresponding device: Soufflant (Blower only) Radiateur (Radiator only) Soufflant and Radiateur (Radiator and Blower)