HOLIDAY Mode – IRSAP heat

This guide explains how to set the radiator, the blower, or both to HOLIDAY mode.

AVAILABLE FOR

HOLIDAY Mode allows the radiator or blower to activate only when the temperature falls below a minimum threshold to prevent freeze damage.

Perfect for long periods of absence: it ensures energy savings and radiator safety without worries.

WARNING
The booster and/or the radiator will activate to heat only if the temperature detected in the room is below the threshold set.

Here you will find answers to the most frequently asked questions.

See the section Operation to discover all the functions of the radiator with blower.

If you have followed all the steps but the problem persists, please contact our Customer Service.

			Make sure the switch on the back of the Blower is set to position 1 and that the Blower is turned on. Press the button repeatedly until the icon appears at the top of the display, corresponding to holiday mode;

			Use the + and – buttons to select the device to activate in holiday mode, then press OK to confirm. Available options: bLo – blower only rAd – radiator only rAd bLo – radiator and blower

			Use the + and – buttons to set the desired temperature. (Allowed range: 0.5°C – 10°C) Press OK to confirm the setpoint.

			Use the + and – buttons to set the duration of the holiday period: 01d (1 day); 02d (2 days); 44d (44 days). (Allowed range: 1 day - 44 days) Press OK to confirm the duration. The A/M LED will flash green to confirm receipt of the setting. Then it will stay solid green. The countdown will begin on the remote control display.

Remote Control Icon	Temperature Range
	0.5°C - 10°C

Related articles