Skip to main content

How to Program the Blower Remote Control

Updated

This guide explains how to correctly set the date and time on your remote control and how to pair it with your blower.

 

Set time and date

    
  1. Insert the batteries
    Make sure to observe the correct polarity.
     
  2. Set the time
    1. The display shows 12:00.
    2. Use +/- to set the correct time.
    3. Press OK to confirm.
       
  3. Set the day of the week
    1. The display shows 01 (first day of the week).
    2. Use +/- to select the correct day
      (1 = Monday, 2 = Tuesday, etc.).
    3. Press OK to confirm.
        
  4. Set the date
    1. The display shows 01 - 01.
      The first number represents the day of the month, the second the month
      (01 = January, 02 = February, etc.).
    2. Use +/- to select the correct date.
    3. Press OK to confirm.
       
  5. Set the year
    1. The display flashes 2000 (default year).
    2. Use +/- to select the current year.
    3. Press OK to confirm.

 

 

Associazione al Blower

 

    
  1. Set the switch on the back of the BLOWER to position 01.
     

 

    
  1. The A/M – RF Com LED (On/Off – Radio Frequency Communication) on the front of the blower will start blinking red and green.
     
  2. Press and hold the Power button on the front of the blower until all 4 LEDs blink green.
       
   
  1. Then press and hold the Navigation button until rF ini appears on the display.
     
  2. The 4 LEDs will stop blinking. The A/M – RF Com LED will blink red and green again, then turn solid green.
    This confirms that the remote control has been successfully paired with the blower.

    

WARNING
If the remote control is not programmed correctly, the radiator may not follow the scheduled settings.

 

 

Tips and Troubleshooting

Find answers to the most frequently asked questions here:

Check the Installation section for all the preliminary information on using the Tesi Electric radiator.

 

Still need help?

If you’ve followed all the steps and the issue persists, please contact our Customer Service.


 

Related articles