Blower Start-Up Guide

In this section you will find all the useful information to correctly use the Blower from the very first start-up.

Powering On

REMOTE CONTROL

1. Open the flap by gently sliding the plastic cover.
2. Insert 2 AAA 1.5 V batteries, respecting the polarity (+ / –), then close the flap until it clicks.
3. Proceed with the remote control programming.
   
   Attention! 
   Programming is necessary to ensure the correct operation of the radiator and the registration of schedules.

RADIATOR

1. Connect the power cable to the nearest power outlet.

2. Set the switch located on the back of the BLOWER to number 1.
   THE A/M LED – RF Comm (Stop/Start – Radio Frequency Communication) located on the front of the blower will start flashing red and green.

3. Pair the remote control with your towel radiator
   
    

---

Tips or Troubleshooting

Here you will find answers to the most frequently asked questions.

• Remote Control: buttons and display
• Radiator modes and functions with Blower
• How to use a predefined programme
• How to create a customised programme
   

---

Consult the Installation section to discover all the preliminary information about the operation of the radiator with Blower.

---

Still need help?

If you have followed all the steps but the problem persists, contact our Customer Service.