Skip to main content

The A/M LED flashes green and red

Updated

When the LED next to the M/A (On/Off) Comm RF (RF Communication) indicator flashes, it often indicates that the radiator with Blower has lost communication with the remote control. It will therefore be necessary to restore it.

 

Re-pairing procedure
  1. Move the switch located on the back of the Blower first to number 0 and then to number 1.

 
  1. The M/A Com RF LED will flash red and green
     
  2. Press and hold the Power button on the front of the blower until the 4 LEDs flash green, then release the button

  1. Press and hold the navigation button until the text rF ini appears on the display
     
  2. The 4 LEDs will stop flashing to confirm that the connection between the remote control and the blower has been established.


Tips or troubleshooting

Here you will find answers to the most frequently asked questions.

 

 

See the section Problems and Solutions to resolve the most common problems independently.

 

 

Still need help?

If you have followed all the steps but the problem persists, contact our Customer Service.

 

Related articles