Skip to main content

How to clean the filter

Updated

The guide explains how to correctly clean the blower filter.

What it is

The blower is equipped with a removable dust filter, designed to retain impurities that could enter the device and prevent the radiator from working properly.
 

When to change the filter

A dirty filter can obstruct the airflow and, in some cases, cause the radiator to stop.

The blower automatically signals filter cleaning every 200 hours of operation.
In general, IRSAP recommends cleaning the filter approximately once a month, depending on the conditions of use and the environment.

 

LED   COLOUR  
       
Filtre   Steady red  

 

 

How to resolve the Filter Cleaning error

 

    
  1. Move the switch located on the back of the Blower to 0. 
       

 

    
  1. Press the filter, located behind the Blower, to the right or to the left depending on the available space.
    The filter will slide behind the Blower and can be pulled out for removal.
     
  2. Wash the filter with water and a soft sponge, then let it dry completely.
     
  3. Insert the filter again behind the Blower, sliding it into its housing until it is correctly positioned.
       

   
  1. Move the switch located on the back of the Blower to 1
       

   
  1. Press and hold the Power    button on the front of the Blower for 5 seconds.
     
  2. Then press OK on the remote control to confirm that the problem has been resolved.

 

 

Tips or troubleshooting 

Here you can find answers to the most frequently asked questions.

 

 

See the Problems and Solutions section to solve the most common problems yourself.

 

 

Still need help?

If you have followed all the steps but the problem persists, contact our Customer Service.

Related articles